^ The ExtendSrf command moves a surface edge to lengthen a surface. The ConnectSrf command extends surface edges to meet and trims the surfaces to each other. The Align command lines up the bounding boxes of objects. The Bend command deforms objects by bending along a spine arc. The CageEdit command deforms objects smoothly using two-, and three-dimensional cage objects The Cage command creates a box-shaped cage object to be used with the CageEdit command to deform other objects. The Flow command re-aligns an object or group of objects from a base curve to a target curve. Note: Use the Flow command to map a flat, straight shape to a curved shape, since it can be easier to draw things when they are lined up than to draw a complex shape around a curve. DISC5:0811 Flow Along Curve The FlowAlongSrf command morphs objects from a source surface to a target surface. DISC5: 0812 Flow Along Surface The Mirror command creates a mirror-image copy of objects. The Move command options control mouse operation for selecting and dragging. The Rotate command rotates objects around an axis perpendicular to the current construction plane. Scales in 2d and 3d The SetPt command moves objects to a specified location in the x-, y-, and/or z-directions. This command is often used to accurately change the position of points and control points. The SetPt command is a fast way to be sure that a set of planar curves are all in the same plane. DISC7:0105 Rotate, Shear, And Fold Faces The Shear command skews objects parallel to one axis at a specified angle. A sheared rectangle, for example, is transformed into a parallelogram. The sides of the parallelogram will progressively lengthen as deformation proceeds but the top and bottom lines maintain their original length. The Taper command deforms objects toward or away from a specified axis The Orient command moves or copies, rotates, and scales objects using two reference and two target points. The OrientCrvToEdge command copies and aligns a curve to a surface edge. DISC4: 0802 Orient On Curve The OrientOnCrv command moves or copies and rotates objects along a curve using the curve direction for orientation. Steps DISC4: 0803 Orient On Surface The OrientOnSrf command moves or copies and rotates objects on a surface using the surface's normal direction for orientation. The ProjectToCPlane command flattens objects onto the construction plane. DISC 2 0605 Constraints And Project To Cplane The RemapCPlane command reorients selected objects to a different construction plane. http://docs.mcneel.com/rhino/5/help/en-us/toolbarmap/transform_toolbar.htm